Sony NAS-SV20i - Manual (Page 28)

28 GB
When “ ” is displayed, the message is
continued to the next page. Press m to see the
entire text string.
3
Select “Connection Method.”
The “Connection” display appears.
If you are performing the initial setup
operation and indicated that you want to set
the network connection (page 21), this
display appears.
4
Select “Wireless LAN.”
5
Select “Manual Registration” -
“Direct Input.”
6
Enter the network name (SSID), and
then press ENTER.
For details on how to input characters, see
“Entering text” (page 19).
7
Select the security setting from the
“Security Setting” display.
You can select from “WPA/WPA2-PSK
(AES),” “WPA/WPA2-PSK (TKIP),”
“WEP,” or “None.”
Note
If you select “None,” the unit skips step 8 and goes
to step 9.
8
Enter the security key (WEP Key,
WPA/WPA2 Key) of your network,
and then press ENTER.
For details on how to input characters, see
“Entering text” (page 19).
The security key appears as “*****”.
9
When “Save settings and check
connection. Press ENTER to
continue.” appears, press ENTER.
It may take a while for the unit to complete
the network settings.
When the network settings have been
completed, “Complete.” appears and
lights up on the display.
If you are making the initial settings, the
“Date&Time” display, step 5 of “Performing
initial setup operations,” appears. Go back to
page 22 and continue the initial setting
process.
10
Make the server settings.
To listen to audio content stored on the server
through the network that have set up in this
section, you need to set up your server
(page 38).
Setting up a wireless
network using an access
point compliant with WPS
You can easily set up a wireless network using an
access point compliant with WPS. WPS setting can
be made either by the push-button configuration
method or the PIN (Personal Identification
Number) code method.
What is WPS (Wi-Fi Protected
Setup)?
WPS is a standard created by the Wi-Fi Alliance
allowing you to setup a wireless network easily
and securely.
Setting up a wireless network
using the WPS push button
configuration method
You can easily set up a WPS wireless connection
with one push of the designated button.
1
Press SETTINGS to enter the
settings menu and select “Network
Settings.”
2
When “Playback and network
functions cannot be used during the
setup. Press ENTER to continue.”
appears, press ENTER.
When “ ” is displayed, the message is
continued to the next page. Press m to see the
entire text string.
3
Select “Connection Method.”
The “Connection” display appears.
If you are performing the initial setup
operation and indicated that you want to set
the network connection (page 21), this
display appears.
4
Select “Wireless LAN.”
5
Select “WPS Push.”