Step 4: connecting the audio cords, Basic h o ok ups and set tings – Sony RDR-GX7 User Manual
Page 19
19
Step 4: Connecting the Audio Cords
Basic H
o
ok
ups and Set
tings
Note
Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be
displayed in the picture. In the case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to the
‘standard definition’ output. If there are questions regarding our TV set
compatibility with this model 480p DVD recorder, please contact our
customer service center.
Step 4: Connecting the
Audio Cords
Select the connection that best suits your system. Be sure to read
the instructions for the components you wish to connect.
*1
Manufactured under license from Dolby laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of
Dolby Laboratories.
*2
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
Connection
Your setup
TV
• Surround effects: Dynamic, Wide
Stereo amplifier (receiver) and
two speakers
• Surround effects: Standard
MD deck/DAT deck
• Surround effects: None
AV amplifier (receiver) having a
Dolby Surround (Pro Logic)
decoder
*1
and 3 to 6 speakers
• Surround effects: Dolby Surround
(Pro Logic)
AV amplifier (receiver) with a
digital input jack having a Dolby
Digital or DTS
*2
decoder and 6
speakers
• Surround effects: Dolby Digital
(5.1ch), DTS (5.1ch)
A
B
C
D
,
continued