Sony RDR-GX7 - Manual (Page 30)

30
Connecting to a Satellite Receiver or a Cable Box
Connecting to a Satellite
Receiver or a Cable Box
Connect a satellite receiver, digital cable box, or a cable box to
this recorder using the LINE IN 1/3 jacks. Disconnect the
recorder’s AC power cord from an AC outlet when connecting
the box.
To record on this recorder, see page 88. To use the Synchro Rec
function, see below.
If you want to use the Synchro Rec function
Connect a satellite receiver to LINE IN 1 jacks of this recorder.
See “Recording from External Equipment with a Timer (Synchro
Rec)” on page 47.
Refer to your satellite receiver’s instructions for more
information.
Notes
• Synchro-Recording does not work with some boxes. For details, refer
to the box’s operating instructions.
• When connecting the LINE IN jacks to the cable box, be sure to also
connect the recorder’s antenna to the cable box.
~ AC IN
S VIDEO VIDEO R-AUDIO-L
COMPONENT VIDEO OUT
PB
Y
PR
S VIDEO VIDEO R-AUDIO-L
1
3
1
2
VHF/UHF
IN
OUT
DIGITAL OUT PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL CONTROL S IN
LINE IN LINE OUT
OUTPUT
AUDIO
R L
VIDEO
LINE IN
S VIDEO
VIDEO R-AUDIO-L
1
3
Satellite receiver, etc.
to LINE IN 1 or 3 DVD recorder
Audio/video cord
(not supplied)
: Signal flow