Sony RDR-GX7 - Manual (Page 20)

20
Step 4: Connecting the Audio Cords
Connecting to your TV
This connection will use your TV’s speakers for sound.
* The yellow plug is used for video signals (page 18).
z Hint
When connecting to a monaural TV, use a stereo-mono conversion cord
(not supplied). Connect the LINE OUT (R-AUDIO-L) 1/2 jacks to the
TV’s audio input jack.
Note
Do not connect the LINE IN (AUDIO L/R) jacks to your TV’s audio
output jacks at the same time.
Connecting to a stereo amplifier
(receiver) and 2 speakers/Connecting
to an MD deck or DAT deck
If your stereo amplifier (receiver) only has audio input jacks L
and R, use
. If your amplifier (receiver) has a digital input
jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the recorder directly to the MD
deck or DAT deck without using your stereo amplifier
(receiver).
z Hint
For connection , you can use the supplied audio/video cord instead
of using a separate stereo audio cord.
A
~ AC IN
S VIDEO VIDEO R-AUDIO-L
COMPONENT VIDEO OUT
PB
Y
PR
S VIDEO VIDEO R-AUDIO-L
1
3
1
2
VHF/UHF
IN
OUT
DIGITAL OUT PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL CONTROL S IN
LINE IN LINE OUT
LINE OUT S VIDEO
VIDEO R-AUDIO-L
1
2
A
AUDIO
INPUT
L
R
VIDEO
DVD recorder
to LINE OUT (R-AUDIO-L) 1 or 2
TV
(yellow)
(white)
(red)
(yellow) *
(white)
(red)
Audio/video cord
(supplied)
: Signal flow
B
B-1
B-2
~ AC IN S VIDEO VIDEO R-AUDIO-L
COMPONENT VIDEO OUT
PB
Y
PR
S VIDEO VIDEO R-AUDIO-L
1
3
1
2
VHF/UHF
IN
OUT
DIGITAL OUT PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL CONTROL S IN
LINE IN LINE OUT
LINE OUT S VIDEO
VIDEO R-AUDIO-L
1
2
B-2 B-1
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DVD recorder
Coaxial digital cord
(not supplied)
to DIGITAL OUT
(COAXIAL or OPTICAL)
or
to LINE OUT
(R-AUDIO-L)
1 or 2
(white) (red)
Stereo audio
cord (not
supplied)
(white) (red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
[Speakers]
Front (L)
Front (R)
to coaxial or optical
digital input
Optical digital cord
(not supplied)
: Signal flow
B-1