Sony DCR-PC110 - Manual (Page 111)

111
“Memory Stick” Operations
You can record moving pictures with sound on “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press START/STOP. Your camcorder starts recording. The camera recording
lamp located on the front of your camcorder lights up. When IMAGESIZE in
the menu settings is set to 160
×
112, the maximum recording time is 60
seconds. However, when IMAGESIZE in the menu settings is set to 320
×
240,
the maximum recording time is 15 seconds.
To stop recording
Press START/STOP.
Note
Sound is recorded in monaural.
When the POWER switch is set to MEMORY
The following functions do not work:
– Wide TV
– Digital zoom
– SteadyShot function
– SUPER NIGHTSHOT
– Fader
– Picture effect
– Digital effect
– Title
– Low lux mode (The indicator flashes.)
– Sports lesson mode (The indicator flashes.)
– MEMORY MIX
When recording in MEMORY mode
The angle of view is a little increased than one in CAMERA mode.
When using an external flash (not supplied)
Turn the power of the external flash off when recording moving pictures on “Memory
Stick”s. Otherwise, the charging sound for the flash may be recorded.
During recording on “Memory Stick”
Do not eject the cassette tape from your camcorder. During ejecting the tape, sound is
not recorded on the “Memory Stick.”
2
POWER
LOCK VCR
MEMORY
CAMERA
OFF(CHR)
320 4 0 REC 0:0 3
[ 1 5 ]
min
SEC
BBB
1
POWER
LOCK VCR
MEMORY
CAMERA
OFF(CHR)
LOCK
Recording moving pictures on “Memory
Stick”s – MPEG movie recording
Recording time can be recorded on
the “Memory Stick”
This indicator is displayed for 5
seconds after pressing START/STOP.
This indicator is not recorded.