Sony DCR-PC110 - Manual (Page 20)

20
Indicators displayed in the recording mode
The indicators are not recorded on tapes.
Recording a picture
Remaining battery time indicator
The remaining battery time indicator roughly indicates the recording time. The indicator may
not be correct, depending on the conditions in which you are recording. When you close the
LCD panel and open it again, it takes about one minute for the correct remaining battery time
in minutes to be displayed.
Time code
The time code indicates the recording or playback time, “0:00:00” (hours : minutes :
seconds) in CAMERA mode and “0:00:00:00” (hours : minutes : seconds : frames) in VCR
mode. You cannot rewrite only the time code.
Remaining tape indicator
The indicator may not be displayed accurately depending on the tape.
Shooting backlit subjects – BACK LIGHT
When you shoot a subject with the light source behind the subject or a subject with a light
background, use the backlight function.
In CAMERA or MEMORY mode, press BACK LIGHT.
The . indicator appears in the viewfinder or on the LCD screen.
To cancel, press BACK LIGHT again.
If you press EXPOSURE when shooting backlit subjects
The backlight function will be canceled.
BACK LIGHT
Recording mode indicator
Cassette memory indicator
This appears when using a tape with cassette memory.
Time indicator
The time is displayed about 5 seconds after the power is
turned on.
Date indicator
The date is displayed about 5 seconds after the power is
turned on.
STBY/REC indicator
Remaining battery time indicator
Time code/Tape counter indicator
Remaining tape indicator
This appears after you insert a cassette and record or
play back for a while.
0:00:01
45min
40 min REC
JUL 4 2000 12:05:56 AM