Sony DCR-PC110 - Manual (Page 48)

48
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) In the playback or playback pause mode, press DIGITAL EFFECT and turn the
SEL/PUSH EXEC dial until the desired digital effect mode flashes.
The indicator changes as follows:
STILL
y FLASH y LUMI. y TRAIL
(2) Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the bars appear. In the STILL or
LUMI. mode, the picture is captured and is stored in memory as a still image at
the time you press the SEL/PUSH EXEC dial.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 39.
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
•You cannot process externally input scenes using the digital effect function.
•To record pictures that you have processed using the digital effect, record the pictures
on the VCR, using your camcorder as a player.
Pictures processed by the digital effect function
•Pictures processed by the digital effect function are not output through the DV IN/
OUT jack.
•You cannot use the PB ZOOM function for pictures processed by the digital effect
function.
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect function is automatically canceled.
Playing back a tape with digital effects
3
2 1
STILL
STILL
DIGITAL
EFFECT