Sony DCR-PC110 - Manual (Page 68)

68
Using with analog video unit and
personal computer – Signal convert
function
You can capture images and sound from an analog video unit connected to a personal
computer which has the i.LINK (DV) jack to your camcorder.
(1) Set the POWER switch to VCR.
(2) Set DISPLAY in
to LCD in the menu settings.
(3) Set A/V t DV OUT in to ON in the menu settings (p. 84).
(4) Start playback on the analog video unit.
(5) Start capturing procedures on your personal computer. The operation
procedures depend on your personal computer and the software which you
use.
For details on how to capture images, refer to the instruction manual of
personal computer and software.
After capturing images and sound
Stop capturing procedures on your personal computer , and stop the playback on the
analog video unit.
Notes
• You need to install software which can exchange video signals.
• Depending on the condition of the analog video signals, the personal computer may
not be able to output the images correctly when you convert analog video signals into
digital video signals via your camcorder. Depending on the analog video unit, the
image may contain noise or incorrect colors.
• You cannot record or capture the video output via your camcorder when the video
tapes includes copyright protection signals such as ID-2 system.
: Signal flow
i.LINK
AUDIO/VIDEO
DV
IN/OUT
VIDEO
AUDIO
S VIDEO
OUT
(not supplied)