Sony PCV-LX920 - Manual (Page 20)

VAIO Slimtop Computer User Guide
20
To change the settings of your VAIO Pen
Your VAIO® Pen tip, eraser, and the upper/lower switch positions are
programmable.
By default, the basic functions performed by the VAIO Pen are:
❑ Pointing — Place the tip of the pen anywhere on the pen tablet screen and
the screen cursor will automatically correspond to that point.
❑
Clicking — Tap the pen tablet screen once with the tip of the pen, or press
the pen tip against the screen with enough pressure to register a single click.
❑
Double-clicking — Quickly tap the pen tablet screen twice in the same
place with the tip of the pen. You can also register a double click by pressing
the upper switch position of the pen’s rocker switch.
❑
Dragging — Point to and select an object by pressing the pen to the pen
tablet screen. Slide the pen tip across the tablet to move the object to the
desired location. To select text, point to the beginning of the text, and then
drag the pen across the tablet until all of the desired text is highlighted.
To replace the Pen tip
Your VAIO Pen is supplied with pen tip replacements. The pen tip wears with
normal use and must be replaced when the tip becomes too short or develops a
flat point. Follow these steps to replace the pen tip:
1 Clasp the worn pen tip with the pen tip removing tool and pull it straight out
of the VAIO Pen barrel.
2 Slide the flat end of a new pen tip straight into the barrel, pushing the tip
firmly until it stops.
Removing the Pen tip
Step One Step Two