Specifications, Formats supported by this system – Sony HT-CT100 User Manual

Page 38

Advertising
background image

38

US

Formats supported by this
system

Digital input formats supported by this system
are as follows.

* Linear PCM accepts sampling frequencies of no

more than 48 kHz.

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC
DISTORTION (Stereo mode):
With 8 ohms loads, both channels driven, from 180 -
20,000 Hz; rated 40 Watts per channel minimum RMS
power, with no more than 1 % total harmonic distortion
from 250 milli Watts to rated output.

Amplifier section

Reference Output Power
Surround mode

Front: 50 Watts/ch
(8 ohms at 1 kHz,
THD 10 %)
Center*: 50 Watts/ch
(8 ohms at 1 kHz, THD
10 %)
Subwoofer: 100 Watts/ch
(4 ohms at 100 Hz,
THD 10 %)

* Depending on the sound field settings and the source,

there may be no sound output.

Inputs (Analog)
TV

Impedance: 30 kohms

Inputs (Digital)
TV, DVD

Optical

SAT Coaxial,

optical

HDMI section

Connector

HDMI 19pin-standard
connector

Video inputs/outputs

BD, DVD, SAT:
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1440 × [email protected]/60 Hz
(pixel sent 2 times)
1280 × [email protected]/60 Hz
1920 × [email protected]/
60 Hz
1920 × [email protected]/
60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz
(pixel sent 2 times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz

Audio inputs

BD, DVD, SAT: Linear
PCM 7.1ch/
Dolby Digital/DTS

Satellite
speaker (SS-MCT100)

Speaker system

Bass reflex, magnetically
shielded

Speaker units

40 × 70 mm (1

5

/

8

× 2

7

/

8

inches) cone type

Dimensions (approx.)

800 Ч 68 Ч 65 mm (31

1

/

2

Ч

2

3

/

4

Ч 2

5

/

8

inches) (w/h/d)

Mass (approx.)

2 kg (4 lb 7 oz)

Active subwoofer (SA-WCT100)

Speaker system

Bass reflex

Speaker unit

160 mm (6

1

/

2

inches) cone

type

Dimensions (approx.)

160 Ч 500 Ч 360 mm (6

3

/

8

Ч 19

3

/

4

Ч 14

1

/

4

inches)

(w/h/d)

Mass (approx.)

10 kg (22 lb 1 oz)

Power requirements

AC 120 V/60 Hz

Power consumption

On: 70 Watts
Active Standby (Control for HDMI is on):

Signal in: 5 Watts (maximum)
No signal: 1.5 Watts (minimum)

Standby (Control for HDMI is off): 0.3 Watts

Specifications

Format

Supported/Not supported

Dolby Digital

a

DTS

a

Linear PCM (2ch)*

a

Linear PCM (5.1ch,
7.1ch)* (Only on
HDMI)

a

Dolby Digital Plus

×

Dolby True HD

×

DTS-HD

Ч

Advertising