Sony PCV-RX270DS - Manual (Page 54)

VAIO Digital Studio Reference Manual 40
11 Push in on the tab (A) to securely latch the holder to the chassis.
12
Connect the inner drive cable connector (B) to the first drive.
13
Connect the outer drive cable connector(C) to the second drive.
14
Connect the first power connector (D) to the first drive.
15
Connect the second power connector (E) to the second drive.
16
Replace the side cover (see “Replacing the Side Cover” on page 23).
17
Reconnect the power cord to the system and then turn on your
computer.
Your computer automatically recognizes the new drive and configures
itself accordingly when you turn it on. Format and partition the new
drive following the instructions provided with the drive.
KY0085.VSD
Tab
C
E
A
B
D
Disk drive holder
Drive connectors