Sony SRS-X7 - Manual (Page 201)

5. Start playing back music on the iPhone/iPad/iPod touch, and adjust the volume.
The speaker starts playing back the selected song.
If playback does not start, perform the process again from step 3.
Hint
The procedure explained above is for guideline purposes. For details, refer to the operating instructions supplied with
the device.
After the dedicated application "SongPal" is downloaded and installed to your smartphone/iPhone, you can use your
smartphone/iPhone as a remote control to operate components connected to the speaker.
The volume level set by the VOL (volume) -/+ buttons of the speaker and that set in iPhone/iPad/iPod touch are
linked.
Note
Loud sound may be output from the speaker if you set the volume too high by the iPhone/iPad/iPod touch.
In some cases, the volume level of the iPhone/iPad/iPod touch might not link with the volume level of the speaker.
Related Topic
Using the BLUETOOTH/Network standby function
Listening to music on a device via BLUETOOTH connection
Notes on use
4-537-384-11(2)
Copyright 2014 Sony Corporation
189