Sony KDL-70XBR3 - Manual (Page 15)

Getting Started
15
Ge
tting Started
✍
Be sure to use only an HDMI cable that bears the HDMI logo.
✍
Do not connect a PC to the TV’s HDMI input. Use the PC IN (RGB IN) input
instead when connecting a PC.
✍
HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p
(except for HDMI IN 3) formats. Note that this TV displays all format types of
picture in a resolution of 1,920 dots × 1,080 lines.
5 AC IN Connects the supplied AC power cord.
6 VIDEO IN 1
S VIDEO Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than composite video (7).
7 VIDEO IN 1/4
VIDEO/L(MONO)-
AUDIO-R Connect to the composite video and audio output jacks on your A/V equipment such as a VCR
or other video equipment. A third composite video and audio jacks (VIDEO 2) is located on
the left side of the TV.
8 HD/DVD IN 5/6
(1080p/1080i/720p
480p/480i)/
L-AUDIO-R Connect to your equipment’s component video (YP B P
R
) and audio (L/R) jacks. Component
video provides better picture quality than the S VIDEO (6) or the composite video (7)
connections.
✍
Component video (YP
B
P
R
) connection is necessary to view 480i, 480p, 720p,
1080i and 1080p formats. Note that this TV displays all format types of picture in
a resolution of 1,920 dots × 1,080 lines.
9 PC IN 9
(RGB/AUDIO) Connect to a personal computer’s video output connector using HD15-HD15 cable (analog
RGB, supplied). Can also be connected to other analog RGB devices.
See “PC Input Signal Reference Chart” on page 51 for the signals that can be displayed.
✍
For some Apple Macintosh computers, it may be necessary to use an adapter
(not supplied). If this is the case, connect the adapter to the computer before
connecting the HD15-HD15 cable.
✍
If the picture is noisy, flickering or not clear, adjust Phase and Pitch of PC
Settings as described on page 47.
0 AUDIO OUT
(VAR/FIX) Connect to the left and right audio input jacks of your audio or video equipment. You can use
these outputs to listen to your TV’s audio through your stereo system. For details, see page 36.
qa DIGITAL OUT
(OPTICAL) Connects to the optical audio input of digital audio equipment that is PCM/Dolby* digital
compatible. (DIGITAL OUT (OPTICAL) is only available for digital channels.)
qs VHF/UHF Connects to your VHF/UHF antenna.
qd CABLE Connects to your cable signal.
✍
VHF/UHF input receives over-the-air broadcast signal frequencies and CABLE
input receives CATV signal frequencies.
✍
Press ANT to switch between VHF/UHF and cable.
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Item Description
HDMI-to-DVI cable
HDMI adapter Audio cable