Sony KDL-70XBR3 - Manual (Page 19)

Getting Started
19
Ge
tting Started
Setting Up the Channel List – Initial Setup
After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen
appears when you turn on the TV for the first time after hooking it up.
1 Press to turn on the TV.
The Initial Setup screen appears.
2 Press V/v to highlight the on-screen
display language. Then press . The
message “Start auto program now?”
appears.
3 Press V/v to highlight “Yes” then press .
Auto Program performed through Initial Setup will automatically
create a list of receivable channels from both VHF/UHF antenna and
cable TV channels if both sources are connected.
To run Auto Program again at a later time
Use the Auto Program feature, see page 39.
✍
If you select “No” during Initial Setup, the Initial Setup screen will
reappear each time you turn on the TV until you complete Auto
Program.