Names and descriptions of parts of the rear panel, Help guide – Sony UDA-1 User Manual

Page 63

Advertising

USB DAC AMPLIFIER

UDA-1

Names and descriptions of parts of the rear panel

1. DIGITAL IN jacks

(USB) port (Type B jack)

COAXIAL jack
OPTICAL jack

2. D/A DIRECT, LINE OUT (analog output) L/R jacks

The D/A DIRECT, LINE OUT jacks directly output the analog signal through the D/A converter without
using any internal connectors or signal switcher, and realize the signal output excluding the elements
that deteriorate the sound quality as much as possible.
Connect your digital audio device to the OPTICAL or COAXIAL jack of the USB DAC AMPLIFIER so
that it can output the signal input from these jacks to the D/A DIRECT, LINE OUT jacks.
(LINE OUT jacks does not output the analog input signal from the LINE IN jacks.)

3. LINE IN (analog input) L/R jacks
4. SPEAKERS (speaker output) L/R terminals
5. AC IN jack
6. EQUALIZER switch

You can select the equalizer setting tuned for the recommended SS-HA3 speakers (not supplied).
(“BYPASS” is selected as the factory default setting.)

7. AUTO STANDBY switch

You can set the AUTO STANDBY function.
(“ON” is selected as the factory default setting.)