Using the “quick navi, Help guide – Sony DSC-RX10 User Manual
Page 120
Advertising
Digital Still Camera
DSC-RX10
Using the “Quick Navi”
You can change the settings directly using the Quick Navi screen when using the viewfinder.
1. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen is set to [For
viewfinder].
2. Press Fn (Function) button to switch the screen to Quick Navi screen.
3. Select the desired function by pressing the up/down/left/right side of the control wheel.
4. Turn the control wheel to select the desired setting.
Performing settings on the dedicated screen
Select the desired function in step 3, then press
on the center of the control wheel. The dedicated
setting screen for the function appears. Follow the operating guides (A) to perform the settings.
How to Use
111
Advertising