The product does not work properly, Help guide – Sony DSC-RX10 User Manual
Page 417
Advertising
Digital Still Camera
DSC-RX10
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product is hot, remove the
battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord. Connect the power
cord and turn on the product again. If the product repeats the same error often or still does not work
after trying these solutions, consult your Sony dealer or local authorized Sony service facility.
4-477-079-12(1)
Copyright 2013 Sony Corporation
Troubleshooting
408
Advertising