Auto hdr, Help guide – Sony DSC-RX10 User Manual
Page 203
Digital Still Camera
DSC-RX10
Auto HDR
Widens the range (gradation) so that you can record from bright parts to dark parts with correct
brightness (HDR: High Dynamic Range). 1 image with proper exposure and one overlaid image are
recorded.
1. MENU →
(Camera Settings) → [DRO/Auto HDR] → [Auto HDR].
2. Select the desired setting using the left/right side of the control wheel.
Menu item details
Auto HDR: Exposure Diff. Auto (default setting):
Corrects the exposure difference automatically.
Auto HDR: Exposure Diff. 1.0EV ― Auto HDR: Exposure Diff. 6.0EV:
Sets the exposure difference, based on the contrast of the subject. Select the optimal level between 1.0
EV (weak) and 6.0 EV (strong).
For example, if you set the exposure value to 2.0 EV, three images will be composed with the following
exposure levels; −1.0 EV, optimal exposure and +1.0 EV.
Note
[Auto HDR] is not available for RAW images.
When the exposure mode is set to [Intelligent Auto], [Superior Auto], [Sweep Panorama] or [Scene
Selection], you cannot select [Auto HDR].
When [Multi Frame NR] is selected, you cannot select [Auto HDR].
You cannot start the next shot until the capture process is completed after you shoot.
You may not obtain the desired effect depending on the luminance difference of a subject and the
shooting conditions.
When the flash is used, this function has little effect.
When the contrast of the scene is low or when product shake or subject blur occurs, you may not
obtain good HDR images. If the product has detected a problem,
is displayed on the recorded
image to inform you of this situation. Shoot again as necessary, paying attention to the contrast or
blur.
How to Use
194