Sony DSC-RX10 - Manual (Page 346)

Digital Still Camera
DSC-RX10
Charging the battery pack
The supplied AC Adaptor is dedicated to this product. Do not connect with other electronic devices.
Doing so may cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's Charge lamp flashes while charging, remove the battery pack being charged, and then
insert the same battery pack firmly back into the product. If the Charge lamp flashes again, this may
indicate a faulty battery or that a battery pack other than the specified type has been inserted. Check
that the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new or different one
and check that the newly inserted battery is charging correctly. If the newly inserted battery is
charging correctly, the previously inserted battery may be faulty.
If the Charge lamp flashes even if the AC Adaptor is connected to the product and the wall outlet (wall
socket), this indicates that charging has stopped temporarily and is on standby. Charging stops and
enters standby status automatically when the temperature is outside of the recommended operating
temperature. When the temperature returns to the appropriate range, charging resumes and the
Charge lamp lights up again. We recommend charging the battery pack in an ambient temperature of
between 10°C to 30°C (50°F to 86°F).
Even if the supplied AC Adaptor is used with the product when you shoot or play back images, power is
not supplied from the wall outlet (wall socket). If you use the AC Adaptor AC-PW20 (sold separately),
you will be able to shoot or play back images while power is supplied from the wall outlet (wall
socket).
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
337