Sony STR-DA7ES - Manual (Page 70)

70 GB
Listening to the sound in another
room (continued) Location of parts
1 ?/1 switch
Press to turn the receiver on or off, or to
turn the 2nd (or 3rd) room output on or off.
2 Command mode buttons
Press to select the command mode.
Tips
• Each time you press a function button or other
operation buttons on the remote, the current
command mode button lights up.
• You can switch the command mode temporarily.
For example, when set to AV SYSTEM 1, if you
press CD/SACD while holding down AV SYSTEM
2, the signal for AV SYSTEM 2 mode is output.
]
}
]
}
+ –
+
–
qa
0
9
qf 1
3
2
6
4
5
7
8
qd
qs
VIDEO 1 VIDEO 2
USE MODE
VIDEO 3
AV SYSTEM 2 3RD ROOM
DVD/LD TV/SAT TAPE
MD/DAT CD/SACD
AUTO DEC 2CH ST
PRESET
MODE
ANALOG
DIRECT
TUNER
CH/PRESET/D.SKIP
— SOUND FIELD —
SHIFT
MUTING
MASTER
VOL
LD AUX SOURCE
AV SYSTEM 1 2ND ROOM
+
–
M m
> .
x X
N
?/1
n
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries with the +
and – properly oriented in the battery
compartment. When using the remote, point it
at the remote sensor on the receiver.
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor of the receiver to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.