Sony PCV-MXS10 - Manual (Page 21)

To Use the Stand By Mode
21
To Use the Stand By Mode
When you plan to stop using your computer for a short period of time, you can
put it in Stand By mode instead of turning it off completely. Putting the computer
in Stand By mode saves energy and allows a quick return to normal computer
use.
Before you set your computer in Stand By mode:
❑
Save your work.
❑ Close all open applications.
❑ End your Internet session, if applicable.
❑ Leave the Windows® operating system running.
Setting the computer to enter Stand By mode using the Stand
By key
Press the (Stand By) key on the upper right corner of the keyboard. The
computer goes into Stand By mode.
Setting the computer to enter Stand By mode using the
Windows taskbar
1 Click Start in the Windows taskbar, then select Turn Off Computer.
2 Click Stand By.
Setting the computer to enter Stand By mode using the Power
button
Briefly press the Power button on the front panel to place your computer into
Stand By mode.
Setting the computer to enter Stand By mode using the
Remote Control
❑
Briefly press the power button on the remote control.
Your installed Lucent™ Win Modem does not support the Wake On Ring
(WOR) feature of the Microsoft® Windows® XP operating system. For optimal
use, Sony recommends that you do not change the preset modem settings in
the Power Management Properties window.