Getting started, Unpacking, Inserting batteries into the remote – Sony HCD-DZ100 User Manual

Page 12: Unpacking inserting batteries into the remote

Advertising
background image

12

GB

Check that you have the following items:
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (5 m

× 4, 15 m × 2)

(16.5 ft.

× 4, 49.5 ft. × 2)

• Video Cord (1)
• Remote Commander (remote) (1)
• Size AA (R6) batteries (2)
• Foot pads*
• Operating Instructions
• Speaker and TV connections (card) (1)

* To prevent speaker vibration or movement while

listening, attach the supplied foot pads to the bottom
face of the speakers.

You can control the system using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor

on the system.

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an extended

period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.

Getting Started

Unpacking

Inserting Batteries into
the Remote

Note

Advertising
This manual is related to the following products: