Sony HCD-DZ100 - Manual (Page 24)

24 GB
You can enjoy sound using the speakers of this system by connecting the AUDIO OUT jacks of another
component. For video connection of other components, connect directly to the TV.
• If you connect a TV to the VIDEO/SAT jacks in Step 3 (page 19), you cannot connect other components to the
system.
Connecting the system and the other component
Outputs the other component through the speakers of this system.
To connect the AUDIO OUT jacks of other component to the VIDEO/SAT
(AUDIO IN) jacks of this system
Connect the VCR or other components to the VIDEO/SAT (AUDIO IN) jacks using the audio cord (not
supplied). When connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks
on the components.
• Be sure to make connections securely to avoid hum and noise. If using the VIDEO/SAT jacks distorts the sound,
change the attenuate setting (page 62).
• When you connect a VCR or digital satellite receiver to the VIDEO/SAT jacks of this system, change the function
by pressing FUNCTION repeatedly to select “VIDEO” or “SAT.” (When you select “ATT ON,” “SAT” appears in
the front panel display instead of “VIDEO.” (page 62))
Step 4: Other Component Hookup
Note
Note
Tip
R
AUDIO
OUT
L
SPEAKER COAXIAL
FM 75
Y R L AUDIO IN P B /C B P R /C R
DVD ONLY COMPONENT VIDEO OUT VIDEO/SAT
AM
VIDEO
S VIDEO (DVD ONLY)
MONITOR OUT
FRONT R FRONT L SURR R SURR L CENTER WOOFER
VCR, digital satellite receiver,
or PlayStation 2, etc.
To VIDEO/SAT
(AUDIO IN)
White (L/audio)
Red (R/audio)