Sony HCD-DZ100 - Manual (Page 29)

Pla
y
ing Discs
29 GB
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operation details supplied with your
disc.
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
3
Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION to select “DVD.”
4
Press A.
5
Load a disc.
Place one disc on the tray, and then press A.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than two discs on the tray.
6
Press H.
The system starts playback (continuous
play).
Adjust the volume on the system.
• Depending on the disc, a menu may appear on the TV
screen. You can play the disc interactively by
following the instructions on the menu. (DVD:
page 33), (VIDEO CD: page 34).
To save the power in standby
mode
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Additional operations
Playing Discs
Playing Discs
"/1 FUNCTION
Adjust the
volume
H
Disc tray
A
"/1
FUNCTION
x
H
X
./>
MUTING
VOLUME +/–
REPEAT
X/x/c
ENTER
DISPLAY
ALBUM –/+
/
Note
Tip
To Press
Stop x
Pause X
Resume play after pause X or H
Go to the next chapter,
track, or scene > (except for JPEG)
Go back to the preceding
chapter, track, or scene . (except for JPEG)
Mute the sound MUTING. To cancel
muting, press it again
or VOLUME + to
adjust the sound
volume.
Stop play and remove the
disc A
When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc
is not skewed on the inner circle of the tray.
continued