Sony HCD-DZ100 - Manual (Page 41)

Pla
y
ing Discs
41 GB
Selecting an effect for image
files in the slide show
(JPEG only)
When you play a JPEG image file, you can
select the effect to be used when viewing the
slide show.
1
Press DISPLAY twice.
The Control Menu for JPEG appears.
2
Press X/x to select [EFFECT],
then press ENTER.
The options for [EFFECT] appear.
3
Press X/x to select the setting you
want.
The default setting is underlined.
• [MODE1]: The image sweeps in from top
to bottom.
• [MODE2]: The image stretches out from
left to right of the screen.
• [MODE3]: The image stretches out from
the center of the screen.
• [MODE4]: The images randomly cycle
through the effects.
• [MODE5]: The next image slides over the
previous image.
• [OFF]: Turns off this function.
4
Press ENTER.
The selected setting takes effect.
When the sound does not match the pictures on
the screen, you can adjust the delay between the
picture and sound.
1
Press DISPLAY in stop mode.
The Control Menu appears.
2
Press X/x to select [A/V
SYNC], then press ENTER.
The options for [A/V SYNC] appear.
3
Press X/x to select the setting.
• [OFF]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
• Depending on the input stream, this function may not
be effective.
1 0 / 2 3 / 2 0 0 4
1(
MODE1
DATA CD
JPEG
MODE1
MODE2
MODE3
MODE4
MODE5
OFF
4)
3 ( 12)
Adjusting the Delay
Between the Picture and
Sound
(A/V SYNC)
Note
X/x
ENTER
DISPLAY
3 ( 2 8 )
1 ( 4 4 )
DVD-RW
T 1 : 3 0 : 5 0
OFF
OFF
ON