Sony PCV-RX791 - Manual (Page 47)

Upgrading and Maintaining Components 35
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module. By default, all of your computer’s
memory sockets are filled with a pair of RIMM modules and a pair of
CRIMM modules.
1
Remove the side panel (see “Removing the Side Panel” on page 26).
2
Remove the power supply (see “Removing the Power Supply” on
page 48).
3
Locate the memory module you wish to remove.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.
✍
The memory modules are located beneath the power supply.