Sony SU-PW1 - Manual (Page 12)

12
(US)
2 Connect the Power Cord and the
Display Cable supplied with the
Display Unit to the Display Unit.
Connect the Power Cord and the Display Cable to the
connectors on the rear side of the Display Unit.
Tip
See the instruction manual of the Flat Panel Color
Television (KE-42XBR900/KE-50XBR900) for more
details on connecting the Power Cord and the Display
Cable.
Fasten the Display Interface Cable and the Power
Cord to the wall, etc. When you route the cable and
the cord in the wall, bore a 50 mm diameter hole in
the wall as shown in the diagram in the left.
Power cord and Display
Interface Cable
10 mm (
13
⁄ 32
inches)