Still image editing, Protecting images, Protecting images – protect – Sony DSC-P93 User Manual
Page 68: Nd 68
68
Protecting images
– Protect
To prevent accidental erasure of an
important image, you can protect it.
•
Note that formatting the “Memory Stick”
erases all the data in the “Memory Stick” even
if images are protected, and these images
cannot be recovered.
•
It may take some time to protect the images.
On the single screen
a
Set the mode dial to
.
b
Display the image you want to
protect with
b
/
B
.
c
Press MENU.
The menu appears.
d
Select
-
(Protect) with
b
/
B
,
then press
z
.
The image currently being displayed is
now protected, and the - (Protect)
mark is indicated on the screen.
e
To protect other images,
display the image you want to
protect with
b
/
B
, then press
z
.
To cancel the protection
In Step 4 or 5, press z again. The -
mark disappears.
On the Index screen
a
Set the mode dial to
, press
(index) to switch to the
Index screen.
b
Press MENU.
The menu appears.
c
Select
-
(Protect) with
b
/
B
,
then press
z
.
d
Select [Select] with
b
/
B
, then
press
z
.
e
Select the image you want to
protect with
v
/
V
/
b
/
B
, then
press
z
.
The green - (Protect) mark is
indicated on the selected image.
f
To protect other images,
repeat Step
5
.
g
Press MENU.
Mode dial
Control button
MENU
VGA
101
2/9
Protect
Exit
BACK/NEXT
TO NEXT
MENU
SELECT
Still image editing