Sony DSC-P93 - Manual (Page 72)

72
Connecting to a
PictBridge compliant
printer
Even if you do not have a computer, you
can easily print images shot using your
camera by connecting the camera to a
PictBridge compliant printer. For
preparation, you only need to select the
USB connection in the SET UP settings and
connect the camera to the printer.
Using a PictBridge compliant printer allows
you to easily print the Index prints
* .
* An Index print function may not be provided
depending on the printer.
• When printing images, we recommend that you
use the fully charged nickel-metal hydride
batteries or AC Adaptor (not supplied) to
prevent the camera turning off.
Preparing the camera
Set the USB mode on the camera to connect
the camera with a printer.
a Set the mode dial to SET UP .
b Select (Setup 2) with V , then
select [USB Connect] with B /
v / V .
c Select [PictBridge] with B / v ,
then press z .
The USB mode is set.
Connecting the camera to
the printer
Connect the (USB) jack on the camera
and the USB connector on the printer using
a USB cable, and turn on the camera and the
printer. The camera turns to playback mode
regardless of the mode dial position and an
image in the selected playback folder is
displayed on the LCD screen.
Mode dial Control button
Setup 2
File Number:
USB Connect:
Video Out:
Clock Set:
PTP
Normal
PictBridge
2 / 9 101
VGA
10:30 AM 2005 1 1 101-0002
BACK/NEXT VOLUME
After the connection
is made, the
mark is indicated on
the LCD screen.
Printer
Still image printing (PictBridge printer)