Sony ICD-LX30 - Manual (Page 11)

11 GB
Ge
tti
n
g
S
ta
rte
d
Step 2: Preparing a Power Source
1
Slide and lift the battery compartment
lid.
2
Insert LR03 (size AAA) alkaline
batteries with correct polarity, and
close the lid.
Be sure to insert the batteries with the
e and E ends in the right position.
The clock setting window appears when
you insert batteries for the first time, or
when you insert batteries after the
memory card recorder has been without
batteries for a certain period of time. See
“Step 5: Setting the Clock” on page 18 to
set the date and time.
z Tips
• When replacing the batteries, files
recorded are not erased even when you
remove the batteries.
• When replacing the batteries, the clock
continues moving for about 20 days after
you remove the batteries.
The batteries you can use
• LR03 (size AAA) alkaline batteries
• NH-AAA-B2KN rechargeable
batteries (not supplied)
(You cannot charge the battery using
the memory card recorder.)
The batteries you cannot use
Manganese batteries
P Notes
• When replacing the batteries, be sure to
replace both batteries with new ones.
• When you are not going to use the
memory card recorder for a long time,