Sony PCV-RS100 - Manual (Page 29)

Identifying Components 13
i.LINK S400 (IEEE 1394) Ports
The 6-pin i.LINK® port on the back panel of the system can supply power
from the computer to an i.LINK device if the device also has a 6-pin
i.LINK port. The 6-pin port supplies 10 V to 12 V and a maximum power
of 6 watts.
Refer to the documentation that came with your compatible i.LINK
device for information on operating conditions and proper connections.
Before connecting compatible i.LINK devices to your system, such as an
optical disk or hard disk drive, confirm their operating system
compatibility and required operating conditions.
The 4-pin i.LINK port at the bottom of the front panel does not supply
power to an i.LINK device.
Ethernet Port
The Ethernet port on the back panel of the system is used to connect to a
10BASE-T/100BASE-TX Ethernet network.
✍
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software applications,
operating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other.
6-pin i.LINK port
(IEEE 1394)
On back of
system
4-pin i.LINK port
(IEEE 1394)
Behind lower
front panel
Ethernet
On back of
system