Sony PCV-RS100 - Manual (Page 48)

VAIO Computer System Reference Manual 32
About Installing Memory
The amount of preinstalled memory may vary, depending on the system
configuration you purchased. Your computer may ship with all available
memory slots filled. See the online specifications sheet for details about
the amount of memory installed in your computer. For memory
replacement or upgrades, use only 2.5 V, 64-bit, PC2100 DDR-SDRAM
Dual InLine Memory Modules (DIMM).
Removing a memory module
1
Shut down your computer and turn off all peripheral devices, such as
your printer.
2
Unplug your computer and any peripheral devices.
3
Remove the cover. See “Removing the cover” .
4
Gently place the unit on its side. If necessary, remove any cables,
add-on cards, or other components to access the memory module
slots.
5
Locate the memory module(s) you wish to remove.
6
Push down on the latches, located on both sides of the module, to
gently eject it from the slot.
7
Grasp one edge of the module and lift it out. Store the module in a
static-free bag.
✍
You can purchase additional memory modules, accessories, and peripheral equipment from
your local retailer.
!
Observe the proper safety precautions when you add or remove the memory in
your computer.