Sony PCV-L620 - Manual (Page 98)

VAIO Computer Reference Manual 90
DIMM Configurations
L2 Cache
Graphics
DIMM1 *
* The PCV-L620 is shipped with 128 MB. SDRAM is expandable to 256 MB. Computer SDRAM is unbuffered
DIMM, specification Rev. 1.0 or later. Supports SDRAM memory. Does not support EDO memory or
buffered DIMM memory. Memory can be installed in either socket. Memory size can vary between sockets.
DIMMs can be single- or double-sided. DIMMs must be 3.3V unbuffered 4-clock, 64-bit or 72-bit, 66 MHz
or 100 MHz SDRAM module. Use only 100 MHz FSB-supported memory. Do not mix 66 MHz memory with
100 MHz memory.
DIMM2 *
0, 16, 32, 64, 128 0, 16, 32, 64, 128
Installed 512 kbytes secondary write-back cache (in processor),
direct-mapped organization, BSB cache
Controller Intel 440BX Host Bridge/Controller
Controller *
* Supports DDC-1 and DDC-2b standards for Plug and Play displays.
ATI Rage ™ LT Pro 64-bit 2X AGP graphics accelerator
including 1X and 2X modes with sidebands
Video memory 8 Mbytes
Resolution (displayed resolution depends on the graphics display you use)
True color (32 bits) Up to 1280 x 1024 at 75 Hz non-interlaced
True color (24 bits) Up to 1600 x 1200 at 75 Hz non-interlaced
High color (16 bits) Up to 1600 x 1200 at 75 Hz non-interlaced
256 colors (8 bits) Up to 1600 x 1200 at 85 Hz non-interlaced