Sony CMT-L7HD - Manual (Page 15)

15 GB
CD
Other operations
To
Stop playback
Pause
Select a track
Find a point in a
track
Play repeatedly
(Repeat Play)
Remove the CD
To enter track number using the
remote
You can also select the desired track using the
remote during Normal Play (no display).
Press the numeric buttons. The playback
automatically starts.
To enter track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter track number 30, press >10, then 3 and 10/0.
Programing the CD tracks
— Program Play
You can make a program of up to 25 tracks on
a CD in any order that you want.
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Press PLAY MODE on the remote in
stop mode repeatedly until
“PROGRAM” appears in the display.
3
Press . or > repeatedly until the
desired track number appears in the
display.
To enter the desired track number using the
remote, press the numeric buttons, then skip
step 4.
4
Press ENTER/YES on the remote.
The track is programmed.
“Step” appears, followed by the order
number of the track just programmed. Then
the last programmed track number appears,
followed by the total playing time of the
program. If you have made a mistake, you
can clear the last programmed track from
the program by pressing CLEAR on the
remote.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press CD u (or CD N on the remote).
Selected track
number Playing time of the
selected track
Last programmed
track number Total playing
time
Do this
Press CD x.
Press CD u (or CD X on the
remote). Press again to resume
playback.
During playback or pause, press
. or > repeatedly until
you find the desired track.
During playback, press and hold
down m or M until you find
the desired point.
Press REPEAT on the remote
repeatedly during playback until
“REP” or “REP1” appears in the
display.
REP: For all the tracks on the
CD up to 5 times.
REP1: For only the currently
playing track.
To cancel playing repeatedly,
press REPEAT on the remote
repeatedly until “REP” and
“REP1” disappear from the
display.
Touch Z (or press Z on the
remote) to remove the CD, then
touch Z (or press Z on the
remote) again to close the CD
cover.
continued