Sony MHC-BX5 - Manual (Page 5)

5
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• The type of speakers supplied varies according to
the model you purchased (see “Specifications” on
page 45).
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type A
Jack type B
For models with a voltage selector,
set VOLTAGE SELECTOR to the
position of your local power line
voltage.
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press ?/1, the
system turns on and the demonstration
automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from
the plug (only for model equipped with
an adaptor).
To connect optional components
See page 38.
To deactivate the demonstration
When you set the time (see “Step 2: Setting
the time”), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DISPLAY once (MHC-DX9/
DX7/DX5) or twice (MHC-BX9/BX7/BX5)
while the system is off.
5
4
VOLTAGE SELECTOR
120V 220V
230 - 240V
continued
FM75
AM
COAXIAL
AM
FM75
COAXIAL
Extend the FM lead
antenna horizontally.
3
AM loop antenna
Extend the FM lead
antenna horizontally.
AM loop antenna