Sony MHC-BX5 - Manual (Page 12)

12
Recording a CD
— CD Synchro Recording
The CD SYNC HI-DUB button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) tape.
1
Press Z and insert a recordable tape
into deck B.
2
Press CD.
3
Press Z OPEN/CLOSE and place a
CD.
Then, press Z OPEN/CLOSE again to
close the disc tray.
When the CD you want to record is not
selected, press DISC SKIP EX-CHANGE
repeatedly to select the CD you want.
4
Press CD SYNC HI-DUB.
Deck B stands by for recording and the
CD player stands by for playback. The
REC PAUSE/START button flashes.
5
Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN
to start playback of the reverse side, then
press x where you want to start recording. TAPE
B reverse side indicator lights up (see page 16).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNC HI-DUB (MHC-BX9/DX9 only).
Note
You cannot listen to other sources while recording.
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
tray.
With the side
you want to
record facing
forward
1 4
3 5 DISC SKIP
EX-CHANGE
6
x
DOLBY NR
2
?/1
(Power)