Sony MHC-BX5 - Manual (Page 15)

Basic Operations
15
Playing a tape
You can use TYPE I (normal) tape. You can
also use the ./> (AMS* function)
button to quickly search for songs you want
to hear. To select either deck A or B, press
TAPE A/B repeatedly.
* AMS (Automatic Music Sensor)
3
Press Z and insert a recordable tape
into deck B.
4
Press REC PAUSE/START.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN
to start playback of the reverse side, then
press x where you want to start recording. TAPE
B reverse side indicator lights up (see page 16).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, use + and – (or
TUNING +/– on the remote) in step 2 to tune in
the desired station manually.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing REC
PAUSE/START in step 4 (MHC-BX9/DX9 only).
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
With the side
you want to
record facing
forward
continued
j J
l L
hH S s
H S s
VOL +/–
nN
x
.>
mM
1
DOLBY NR
3
2 2
1
.
X x
>
4
?/1
(Power)