Initializing the unit – Sony RDP-XA900iP User Manual
Page 26
Advertising
22
US
Initializing the Unit
You can initialize the unit. All settings of the
unit are reset to the factory default settings
when you initialize the unit.
1
Press the ?/1 button to turn on
the unit.
2
Remove the iPod from the
Docking Tray.
3
While holding down VOLUME
–, hold down ?/1. (Hold both
buttons down for at least 5
seconds.)
After resetting, the ?/1 indicator flashes
for 2 seconds.
Tip
You can reset only the network settings of the unit to
the factory default settings using the RESET
(NETWORK) button (page 9).
Advertising