Sony VPL-VW1000ES - Manual (Page 13)

13
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
Preparation 1: Installing the Unit
The lens shift allows you to have broader options for placing the unit and viewing pictures
easily.
Unsuitable installation
Do not place the unit in the following
situations, which may cause malfunction or
damage to the unit.
Near walls
To maintain the performance and reliability
of the unit, leave space between walls and
the unit as illustrated.
Leave a space of at least 5 cm (2 inches)
between the wall and the exhaust port side of
the unit. Note that the wall behind the unit
may become hot.
Poorly ventilated location
Leave space of more than 30 cm (11
7
/
8
inches) around the unit.
Hot and humid
Locations subject to direct cool or
warm air from an air-conditioner
Installing the unit in such a location may
cause a malfunction of the unit due to
moisture condensation or rise in
temperature.
Near a heat or smoke sensor
Malfunction of the sensor may occur.
Very dusty and extremely smoky
locations
Before Setting Up the Unit
30 cm
(11
7 /
8
inches)
30 cm
(11
7
/
8
inches)
30 cm
(11
7
/
8
inches)
5 cm (2 inches)
: Exhaust