Sony VPL-VW1000ES - Manual (Page 61)

61
U
s
in
g
N
e
tw
or
k
Fe
at
ur
es
Displaying the
Control Window of
the Unit with a Web
Browser
1
Connect the LAN cable.
CAUTION
For safety, do not connect the connector for
peripheral device wiring that might have
excessive voltage to this port. Follow the
instructions for this port.
ATTENTION
Par mesure de sécurité, ne raccordez pas le
connecteur pour le câblage de périphériques
pouvant avoir une tension excessive à ce
port. Suivez les instructions pour ce port.
VORSICHT
Aus Sicherheitsgründen nicht mit einem
Peripheriegerät-Anschluss verbinden, der zu
starke Spannung für diese Buchse haben
könnte. Folgen Sie den Anweisungen für
diese Buchse.
2
Set the network settings for the
unit using “Network Setting” on
the Installation
menu ( 1
page 58).
3
Start a web browser on the
computer, enter the following in
the address field, then press the
Enter key on your computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
unit)
You can confirm the IP address of the
unit under “Network Setting” on the
Installation
menu.
The following window appears in the
Web browser:
Once you make the network settings,
you can open the Control window only
by performing step 3 of this procedure.
LAN cable
(straight type)
(not supplied)
Hub, router, etc.
LAN Connector