Screen menu – Sony VPL-VW1000ES User Manual
Page 47
47
U
s
in
g t
he M
e
n
u
s
Screen Menu
You can set the input signal, picture size, aspect mode, etc.
.
These items may not be available, depending on the type of input signal. For details, see “Input
Signals and Adjustable/Setting Items” (
Item names in brackets represent those printed on the remote control.
Note
Picture Position
[POSITION]
You can store up to five combinations of lens settings (focus, window
size, window position) and aspect ratio.
After setting the lens and aspect, select from “1.85:1,” “2.35:1,”
“Custom 1,” “Custom 2” or “Custom 3” depending on the
subtended screen angle, and after confirming, continue by selecting
“Save,” “Delete,” or “Select.”
Save: Stores the current lens settings in the selected position. If a setting
is already stored in that position, it is overwritten.
Delete: Deletes the stored setting. After the setting is deleted, “1.85:1,”
“2.35:1,” “Custom 1,” “Custom 2,” or “Custom 3” in the display
change to “---.”
Select: Recalls the settings of the selected position.
Tip
The optimal aspect ratio is preset for each picture position. The aspect
ratio can be changed and saved for each picture position.
• After you have selected and confirmed the lens position, the lens starts
to move. Do not touch the lens and the area around the lens, otherwise
it may cause injury or a malfunction.
• If you press any button on the unit while the lens is moving, the lens
stops. In this case, select the lens position again or adjust the lens
manually.
• When you use a 2.35:1 or a 16:9 subtended screen angle with the
Picture Position function, make sure that the installation position is
suitable (
• The Picture Position function is not guaranteed to reproduce the lens
settings precisely.
Notes