Sony VPL-VW1000ES - Manual (Page 50)

50
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Status Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain
menus, message when turning off the power, and warning messages.
Language Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai, and Arabic.
Menu Position You can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of the
screen.
Center: Displays the menu on the center of the screen.
Cooling Setting Sets the unit to operate at the prevailing atmospheric pressure.
High: Use this setting when using the unit at an altitude of 1,500 m
or higher.
Standard: Use this setting when using the unit at normal altitudes.
Tip
When this item is set to “High,” the fan noise becomes slightly
louder since the number of fan rotations increases.
Standby Mode You can select the power consumption in standby.
Standard: The power consumption in standby mode is normalized.
Low: The power consumption in standby mode is lowered.
Tip
When this item is set to “Low,” the “PJ Auto Power On” function is
disabled (The function is set to “Off” and does not appear in the
menu). The network function is also disabled in standby mode.