Sony ICD-SX700D - Manual (Page 68)

ICD-SX700 4-127-576-11(1)

GB
When the set date and time
comes
At the set time, the alarm will sound
for about 10 seconds while “ALARM” is
displayed in the display window and the
selected message will be played back.
When the playback ends, the IC recorder
will stop automatically at the beginning
of that message.
To listen to the same message
again
Press  , and the same message will
be played back from the beginning.
To stop the alarm before the
playback starts
Press  (stop) while the alarm sound is
heard. You can stop the alarm playback
even when the HOLD function is
activated.
To change the alarm setting
1
Select “ALARM” – “LIST” in the
menu, then press  .
The alarm list is displayed.
2
Press  or  to select the item
you want to change, then press
 .
3
Press  or  to select “EDIT,”
then press  .
4
Select “DATE,” a day of the week, or
“DAILY,” then press  .
5
Set the date and time and press
 .
“EXECUTING…,” then your settings are
displayed.
6
Press  (stop) to exit the menu
mode.