Sony PCV-RX480DS - Manual (Page 79)

Topics
79
4 Check the connections between your speakers and the computer.
5 Go to Windows® System Properties to verify that the drivers are
installed properly, by following these steps:
a. From the Start menu, point to Settings, and then click Control Panel.
b. Click Systems and the System Properties dialog box appears.
c. Select the Device Manager tab to view the installed drivers.
❑ A dirty or damaged disc may cause the computer to stop responding while it
tries to read the disc. If necessary, remove the disc and check that it is not
dirty or damaged.
Topic: When I click an application icon, the message “You must insert the
application CD into your drive” appears and the software does not start.
❑ Some titles require specific files that are located on the application’s CD-
ROM. Insert the disc and try starting the program again.
❑ Check to make sure you inserted the CD-ROM with the label side facing up.
Topic: Why doesn't my CD-RW drive record at the highest speed?
Sony recommends using 8x CD-RW or 12x CD-R to achieve optimum
performance. If you are using other non-12x media and have difficulty with
formatting, change the write speed from12x to a lower setting. If you must use
other media and are having difficulty formatting non-8x CD-RW media, change
the write speed from 8x to a lower setting
To change write speed follow these steps:
1 From the Start menu, select Programs, select Adaptec Easy CD Creator, and
then click on Create CD.
2 Click on Audio and then click on Audio CD.
3 From the Tools menu, click on CD Drive Properties. The CD Drive
Properties dialog box appears.
4 From the Write Speed drop-down list, select a lower setting.
5 Click Close.