Sony PFM-510A1WU - Manual (Page 27)

27
(GB)
Operating a Specific Monitor
with the Remote Commander
Using the supplied Remote Commander, you can
operate a specific monitor without affecting other
monitors that are installed together.
1
Press ID MODE ON on the Remote Commander.
Monitor index numbers appear in white characters
on all the monitors. (Every monitor is allocated an
individual preset index number from 1 to 255.)
See “To change the index number” in the column to the
right on this page to change the index number.
ON
ID MODE
SET
OFF
I N D E X N O . 1 1 7 . . .
2
Input the index number of the monitor you want to
operate using 0 – 9 buttons on the Remote
Commander.
The input number appears right next to each
monitor’s own index number.
2
5
8
3
6
9
1
4
7
10/0
I N D E X N O . 1 1 7 1 1 7
3
Press ID MODE SET.
The character on the selected monitor changes to
cyan while others change to red.
ON
ID MODE
SET
OFF
You can operate only a specified monitor. (All
operations are available in ID mode except
POWER ON/OFF.)
4
After necessary adjustment, press ID MODE OFF.
The monitor returns to the normal mode.
ON
ID MODE
SET
OFF
To change the index number
You can change the index number if necessary.
When you change the number, use the buttons on the
monitor.
1
Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T C A N C E L ENTER MENU
2
Press M/m to move the cursor (B) to “REMOTE”
and press ENT.
The REMOTE menu appears on the monitor
screen.
R E M O T E
I N D E X N O . : 0 0 1
R E M O T E M O D E : T V
R E M O T E O N L Y : O F F
S E L E C T C A N C E L ENTER MENU
3
Press M/m to move the cursor (B) to “INDEX
NO.” and press ENT.
The following menu appears on the monitor
screen.
I N D E X N O . : 0 0 1
4
Select the index number with M/m and press ENT.
The menu returns to the REMOTE menu.
Index number
Input number
Operating a Specific Monitor with the Remote Commander