Sony STR-DE875 - Manual (Page 51)

51
Other Operations
Sound Field Link
When set to “ON”, the sound field that was last applied to
a program source is automatically applied whenever it is
selected. For example, if you listen to CD with STADIUM
as the sound field, change to a different program source,
then return to CD, STADIUM will be applied again. If you
do not want to use this function, set to “OFF”. The default
setting is “ON”.
1
Press SET UP.
2 Press the cursor buttons ( or ) to select “S.
FIELD LINK”.
3 Turn the jog dial to select “ON” or “OFF”.
Adjusting the CONTROL A1 auto power
on
Lets you turn on the receiver automatically when the
component connected via CONTROL A1 cords (see page
12) is turned on and the playback is started.
When set to “OFF”, you can save the power consumption
of the receiver during standby mode. The default setting
is “ON”.
1
Press SET UP.
2 Press the cursor buttons ( or ) to select “AI
AUTO POWER”.
3 Turn the jog dial to select “ON” or “OFF”.
Adjusting the CONTROL A1 auto
function
Lets you switch the function of this receiver to the Sony
components connected via CONTROL A1 cords (see page
12) automatically when the connected component is set to
play mode. The default setting is “ON”.
1 Press SET UP.
2
Press the cursor buttons ( or ) to select “AUTO
FUNCTION”.
3
Turn the jog dial to select “ON” or “OFF”.
The SET UP button allows you to make the following
adjustments other than specifying the speaker parameters.
6.1 CH DECODING
This parameter lets you enjoy the appropriate surround
sound from the surround channels. The default setting is
“AUTO”.
1 Press SET UP.
2
Press the cursor buttons ( or ) to select
“6.1 CH DECODING”.
3
Turn the jog dial to select “AUTO”, “ON” or “OFF”.
Notes
• You can set this parameter using 6.1 CH DECODING on the
front panel.
• When set to “AUTO”, the receiver performs 6.1 channel matrix
decoding only if 6.1 channel signals decode flag is ON.
• When set to “ON”, the receiver performs 6.1 channel matrix
decoding only if the surround signals are 2 channel, regardless
of the 6.1 channel decode flag.
• When set to “OFF”, the receiver does not perform 6.1 channel
matrix decoding.
• During “A.F.D.” this parameter is always set to “AUTO”, and
you cannot change the setting.
• When the 6.1 channel matrix decoding is performed and the
surround back speaker is set to “NO”, you can enjoy the
surround back signals with Virtual 3D technology, even
without an actual surround back speaker (the box around SB
does not light up). If the surround back speaker is set to “YES”,
the surround back signals are output through the actual
speaker (
SB
lights up). Please note that you can set the
surround back speaker only when the center speaker is set to
“NO” (page 20).
Multi channel assignment
Lets you assign a function to MULTI CH. You cannot
assign TUNER or PHONO.
1
Press SET UP.
2 Press the cursor buttons ( or ) to select
“MULTI CH”.
3
Turn the jog dial to select “NONE”, “VIDEO 1”,
“VIDEO 2”, “VIDEO 3” (STR-DE975 only), “DVD/LD”,
“TV/SAT”, “MD/DAT” (STR-DE975 only), “TAPE”
(STR-DE975 only), “MD/TAPE” (STR-DE875 only) and
“CD/SACD”.
Adjustment Using the SET UP Button