Installing an additional hard disk drive – Sony PCV-RS310 User Manual
Page 57
Advertising
Upgrading and Maintaining Components
43
Installing an additional hard disk drive
1
Shut down your computer and turn off all peripheral devices, such as
your printer.
2
Unplug your computer and any peripheral devices.
3
Remove the cover. See
4
Configure the jumpers on the new drive as a slave. See the
configuration instructions supplied with your drive.
5
Detach the power and drive cables from the original hard disk drive
that is preinstalled in your computer.
6
Release the drive holder from the chassis by removing the drive
holder screw.
7
Slide the drive holder out.
Removing the drive holder
Advertising