Sony CMT-NE3 User Manual
Micro hi-fi component system, Cmt-ne5 cmt-ne3
Advertising
model name[CMT-NE5/CMT-NE3]
[4-253-397-11(2)]
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-NE5-
NE3\DTP\4253397111\425339711CMTNE5UC2\GB01COV-CEL.fm]
masterpage:Right
©2004 Sony Corporation
4-253-397-11(2)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. ______________ Serial No. ______________
CMT-NE5
CMT-NE3
Advertising
Table of contents
Document Outline
- Table of Contents
- How to use this manual
- Playable discs
- Hooking up the system
- Setting the clock
- Loading a disc
- Playing a disc
- Playing repeatedly
- Creating your own program
- Presetting radio stations
- 1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
- 2 Press TUNING MODE repeatedly until “AUTO” appears in the display.
- 3 Press +/– (or TUNING +/– on the unit).
- 4 Press TUNER MEMORY.
- 5 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset number.
- 6 Press ENTER.
- 7 Repeat steps 3 through 6 to preset other stations.
- 1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
- 2 Press TUNING MODE on the unit repeatedly until “AUTO” and “PRESET” disappear from the display.
- 3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.
- 4 Press TUNER MEMORY.
- 5 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset number.
- 6 Press ENTER.
- 7 Repeat steps 3 through 6 to preset other stations.
- Listening to the radio
- 1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
- 2 Press TUNING MODE repeatedly until “PRESET” appears in the display.
- 3 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset station.
- 1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
- 2 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.
- 3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.
- Using the Radio Data System (RDS)
- Loading a tape
- Playing a tape
- Recording your favorite CD tracks on a tape
- Recording on a tape manually
- Adjusting the sound
- Falling asleep to music
- Waking up to music
- 1 Prepare the sound source you want to play.
- 2 Adjust the volume.
- 3 Press CLOCK/TIMER SET.
- 4 Press ./> repeatedly until “PLAY” appears, then press ENTER.
- 5 Set the time to start playing.
- 6 Set the time to stop playing following the same procedure as step 5.
- 7 Press ./> repeatedly until the desired sound source appears.
- 8 Press ENTER.
- 9 Press ?/1 to turn off the system.
- Timer recording radio programs
- 1 Tune in the preset radio station (see “Listening to a preset station” on page13).
- 2 Press CLOCK/TIMER SET.
- 3 Press ./> repeatedly until “REC” appears, then press ENTER.
- 4 Set the time to start recording.
- 5 Set the time to stop recording following the same procedure as step 4.
- 6 Load a recordable tape.
- 7 Press ?/1 to turn off the system.
- Turning off the display
- Viewing information about the disc in the display
- Hooking up optional components
- Problems and remedies
- 1 Make sure the power cord and speaker cords are correctly and firmly connected.
- 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action.
- 1 Disconnect the power cord.
- 2 Reconnect the power cord.
- 3 Press ?/1 to turn on the system.
- 4 Press x, ?/1 and turn volume to the left at the same time.
- Messages
- Precautions
- On operating voltage
- On safety
- On placement
- On heat buildup
- On operation
- Notes on discs
- Cleaning the cabinet
- To save a tape permanently
- Before placing a cassette in the tape deck
- When using a tape longer than 90minutes
- Cleaning the tape heads
- Demagnetizing the tape heads