Warning indicators and messages, Self-diagnosis display messages – Sony DSC-R1 User Manual

Page 118

Advertising
background image

118

Warning indicators and messages

If a code starting with a letter of the
alphabet appears, your camera has a self-
diagnosis display. The last two digits
(indicated by

ss

) will differ depending on

the state of the camera.
If you are unable to solve the problem even
after trying the following corrective actions
a few times, contact your Sony dealer or
local authorized Sony service facility.

C:32:

ss

•

There is trouble with your camera’s
hardware. Turn the power off and on
again.

C:13:

ss

•

The camera cannot read or write data on
the recording medium. Re-insert the
recording medium several times.

•

An unformatted recording medium is
inserted. Format the recording medium
(pages 76, 78).

•

The inserted recording medium cannot
be used with your camera, or the data is
damaged. Replace the recording
medium (page 122,

t

step 3 in “Read

This First”).

E:61:

ss

E:91:

ss

•

A camera malfunction has occurred.
Reset the camera (page 107), then turn
the power on again.

If the following messages appear, follow
the instructions.

E

•

The battery level is low. Charge the
battery pack (

t

step 1 in “Read This

First”). Depending on the conditions of
use or the type of battery pack, the
indicator may flash even though there
are still 5 to 10 minutes of remaining
battery time left.

For "InfoLITHIUM" battery only

•

This battery pack is not a
“InfoLITHIUM” type.

System error

•

Turn the power off and then on again
(

t

step 2 in “Read This First”).

Insert Memory Stick
Insert CF Card

•

Insert the recording medium into the
camera before connecting to a
PictBridge compliant printer.

•

Close the “Memory Stick”/CF card
cover before making a PictBridge
connection or during the connection.

No Memory Stick

•

Insert a “Memory Stick” (

t

step 3 in

“Read This First”).

•

Set the

/CF switch to CF and use a

Microdrive/CF card.

Reinsert the Memory Stick

•

Insert the “Memory Stick” correctly.

•

The inserted “Memory Stick” cannot be
used in your camera (page 122).

•

The “Memory Stick” is damaged.

•

The terminal section of the “Memory
Stick” is dirty.

Self-diagnosis display

Messages

Advertising