Sony DSC-R1 - Manual (Page 67)

67
Us
ing th
e
m
enu
For details on the operation
t
page 31
• To protect all images in the folder, select [All In This Folder] in step 4, and press the center of the multi-
selector. Select [On] by moving to B, then press the center of the multi-selector.
To cancel the protection
In single-image mode
Press the center of the multi-selector in step 3 or 4 of “To protect images in single-image
mode.”
In index mode
1 Select the image for which you want to remove protection in step 5 of “To protect images in
index mode.”
2 Press the center of the multi-selector to turn the - indicator gray.
3 Repeat the operation above for all images to be unprotected.
4 Press MENU, select [OK] by moving the multi-selector to B, and then press the center of the
multi-selector.
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of “To protect images in index mode,” and press the
center of the multi-selector. Select [Off] by moving the multi-selector to
B , then press the
center of the multi-selector.
• Note that formatting the recording medium erases all the data stored on the recording medium, even if
images are protected, and these images cannot be recovered.
• It may take some time to protect an image.
Adds a (Print order) mark to images you want to print (page 103).
See page 99.
Plays back recorded images in order (Slide show).
DPOF
(Print)
(Slide)